SSF-S serials servo motor injection molding machine
Home > Products > SSF-S serials servo motor injection molding machine

Small servo motor injection molding machine(SSF420-S)

SSF-S serials servo motor injection molding machine

Small servo motor injection molding machine(SSF420-S)
  • Parameters
  • Description
  • Accessories
  • Application

SSF420-S Parameters

Items

Parameter

Unit

SSF420-S

Injection Unit

Screw diameter

mm

A

B

27

30

Screw L/D ratio

L/D

18.4

16.5

Shot volume(theoretical)

Cm3

55

68

Injection weight(PS)

g

50

62

 

Oz

1.9

2.1

Injection rate

g/s

50

62

Injection pressure

Mpa

207

168

Screw speed

rmp

200

Clamping unit

Clamp force

KN

420

Open stroke

mm

245

Distance between tie bars (W*H)

mm

260*260

Max mould thickness

mm

300

Min mould thickness

mm

100

Ejector stroke

mm

65

Ejector force

KN

25

Ejector number

PC

1

Dia of mould location hole

mm

80

Others

Max pump pressure

Mpa

16

Pump motor power

KW

5.5

Heating power

KW

3.2

Machine dimension(L*W*H)

m

3.1*1.1*1.4

Machine weight

T

1.65

Oil tank capacity

L

95

Notes:(1)Theoretical injection volume=screw diameter×screw stroke;
         (2)Actual injection weight is 91% of the theoretical volume;
         (3)All the data is PS values.
Remark: Above-mentioned technical parameters are all theoretical values in 50HZ operation state. The technical parameters are subject to change for technical improvement without notice.
 
Mold Platen Drawing

 

Our smallest SSF420-S injection molding machines are applied to produce precision plastic parts like electronic small parts, plastic color chips and other small plastic parts, with its small size, fast cycle time, friendly operation screen, warmly welcomed by customers.
 
 
Advantages of servo motor 
1.There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.
 
2.High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.
 
3.Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.
 
4.Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.
 
5.Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.
Standard features 
Double-cylinder balanced injection system
Multi-stage pressure&speed injection
Back pressure adjustment device
Low pressure mold protection
Single hydraulic core pulling valve block
Multiple hydraulic ejector knock-out
Mechanical, Electrical safety device
Auto lubrication system
Hydraulic pressure full proportional control
All computer control system
Mold data memory system (Can save 199 set molds data)
 
 
Standard components
Mechanical leveling pad
Extended nozzle
Spare parts (O-rings)
Tool box
Lubrication grease
     
 
Optional functions & Auxiliaries
Double air blast valve
Single core pulling valve
Water regulation meter
Ceramic heaters
Water flow regulator
Three color alarming light
Euromap 12,67 robot interface
Oil bypass filter
Back pressure valve controller by computer
Hydraulic safety device
 
Robot
Hopper dryer
Auto loader
Hopper magnet
Mold clamps
Chiller
Plastic dehumidifier
Mold temperature controller
Oil temperature controller

Electronics small parts

Masterbatch &pigments

Children toys

 

Hot keywords:high quality
Leave Messages Please feel free to contact us, your inquiry will reply within 24 hours.
Related Keywords:
small injection machine

small injection machine

Servo Motor injection machine

Servo Motor injection machine

Servo Motor injection molding machine

Servo Motor injection molding machine

small injection molding machine

small injection molding machine

injection molding machine parts

injection molding machine parts

injection molding machine service

injection molding machine service

injection molding machine accessories

injection molding machine accessories

injection molding machine price

injection molding machine price

Products
Top
Product Catalog
Products