SSF-S series servo motor injection molding machine

52TON hydrualic servo plastic injection moulding machine(SSF520-S)

high quality
52TON hydrualic servo plastic injection moulding machine(SSF520-S)
52TON hydrualic servo plastic injection moulding machine(SSF520-S)



SSF520 Parameters 
Items Parameter Unit SSF520
Injection Unit Screw diameter  mm A B C
25 28 32
Screw L/D ratio L/D 22.6 20 17.7
Shot volume(theoretical) Cm3 56 70 92
Injection weight(PS) g 51 64 84
Oz 1.8 2.2 2.9
Plasticizing Capacity g/s 5.6 6.9 8.8
Injection rate g/s 39 48 65
Injection pressure Mpa 265 211 162
Screw speed rpm 200
Clamping unit Clamp force KN 520
Open stroke mm 270
Distance between tie bars (W*H) mm 300*300
Max mould thickness mm 340
Min mould thickness mm 100
Ejector stroke mm 70
Ejector force KN 25
Ejector number PC 1
Dia of mould location hole mm 100
Others Max pump pressure Mpa 16
Pump motor power KW 5.5
Servo motor power KW 7.5
Heating power KW 4.7
Machine dimension(L*W*H) m 3.3*1.1*1.6
Machine weight T 2.2
Oil tank capacity L 115
Notes:(1)Theoretical injection volume=screw diameter×screw stroke;
         (2)Actual injection weight is 91% of the theoretical volume;
         (3)All the data is PS values.
Remark: Above-mentioned technical parameters are all theoretical values in 50HZ operation state. The technical parameters are subject to change for technical improvement without notice.

Mold platen drawing

Our smallest energy saving SSF520-S injection molding machines are applied to produce precision plastic parts like Medical parts, electronic small parts, plastic color chips and other small plastic parts, with its small size, fast cycle time, friendly operation screen, warmly welcomed by customers.
Advantages of servo motor 
1.There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.
2.High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.
3.Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.
4.Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.
5.Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.
Share your thoughts with us today!   Showing 6 of 0 reviews
Most recent
Top Reviews
Read more
Your rating
Your review *
Name *
Enter your Name
Email *
Enter your Email
Contact Us Now
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Products you want
Message can't be empty
Verification code error
Concact Us Now
Plastic Injection Molding Machine | Injection Molding Machine Manufacturers - SS Machinery
No.91 Mingke Road,Yinzhou Industrial Zone,Jiangshan Town,Yinzhou Area,Ningbo,China
You can trust us
We are a professional Manufacturer in China, and we are constantly innovating so that our customers can have better products and services.
Marketing Support by Globalsir