S Series Servo Motor Injection Molding Machine

1500g Injection Molding Machine(SSF4100-S)

high quality
1500g Injection Molding Machine(SSF4100-S)
1500g Injection Molding Machine(SSF4100-S)



SSF4100-S Parameters
Items Parameter Unit SSF4100-S
Injection Unit Screw diameter  mm A B C
70 75 80
Screw L/D ratio L/D 22.5 21 19.5
Shot volume(theoretical) Cm3 1385 1590 1809
Injection weight(PS) g 1260 1446 1646
OZ 44 51 58
Plasticizing Capacity g/s 62 73 85
Injection rate g/s 330 380 430
Injection pressure Mpa 199 173 152
Screw speed rpm 150
Clamping unit Clamp force KN 4100
Open stroke mm 715
Distance between tie bars (W*H) mm 770*720
Max mould thickness mm 780
Min mould thickness mm 250
Ejector stroke mm 180
Ejector force KN 125
Ejector number PC 13
Dia of mould location hole mm 160
Others Max pump pressure Mpa 16
Servo motor power KW 45
Heating power KW 25
Machine dimension(L*W*H) m 7.3*2.0*2.4
Machine weight T 15
Oil tank capacity L 700
Notes:(1)Theoretical injection volume=screw diameter×screw stroke;
         (2)Actual injection weight is 91% of the theoretical volume;
         (3)All the data is PS values.
Remark: Above-mentioned technical parameters are all theoretical values in 50HZ operation state. The technical parameters are subject to change for technical improvement without notice.


Mold platen drawing

SSF4100-S injection molding machines applies to the injection molding process of various kinds of thermoplastics. Clamp force is 410T.


Advantages of servo motor

1. There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.

2.High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.

3.Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.

4.Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.

5.Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.

Share your thoughts with us today!   Showing 6 of 0 reviews
Most recent
Top Reviews
Read more
Your rating
Your review *
Name *
Enter your Name
Email *
Enter your Email
Contact Us Now
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Products you want
Message can't be empty
Verification code error
Concact Us Now
Plastic Injection Molding Machine | Injection Molding Machine Manufacturers - SS Machinery
No.91 Mingke Road,Yinzhou Industrial Zone,Jiangshan Town,Yinzhou Area,Ningbo,China
You can trust us
We are a professional injection molding machine Manufacturer in China, and we are constantly innovating so that our customers can have better products and services.
Marketing Support by Globalsir
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Message can't be empty
Verification code error